UNIVERSITY OF KENTUCKY
This proposal will develop, out of a greater understanding of the major influencing factors of sustainable manufacturing, the most relevant and significant metrics for product/process design for sustainability. In parallel, the proposal will also establish a framework for product-process ontology for interoperability for sustainable manufacturing, leading to the development of predictive models for product and process performance with testbed validation.
Choose a quarter and click "Go."
| AWARD OVERVIEW |
| Award Number |
60NANB10D009 |
Funding Agency |
Department of Commerce |
| Total Award Amount |
$1,499,934 |
Project Location - City |
Lexington |
| Award Date |
01/08/2010 |
Project Location - State |
KY |
| Project Status |
More than 50% Completed |
Project Location - Zip |
40508-0000
|
| Jobs Reported |
0.53 |
Congressional District |
06 |
| Project Location - Country |
US |
|
|
Recipient Information
(Grants)
| Recipient Information (Grants) |
|
Recipient Name
|
UNIVERSITY OF KENTUCKY |
| Recipient DUNS Number |
939017877
|
| Recipient Address |
500 S LIMESTONE 109 KINKEAD HALL |
| Recipient City |
LEXINGTON |
| Recipient State |
Kentucky |
| Recipient Zip |
40526-0001 |
| Recipient Congressional District |
06 |
| Recipient Country |
USA |
Required to Report Top 5
Highly Compensated Officials |
No |
Projects and Jobs Information
| Projects and Jobs Information |
| Project Title |
Development of Metrics, Metrology and a Framework for Product-Process Ontology for Interoperability in Model-Based Sustainable Manufacturing (ARRA) |
| Project Status |
More than 50% Completed |
| Final Project Report Submitted |
No |
| Project Activities Description |
General Science |
| Quarterly Activities/Project Description |
Module 1: The Product Sustainability Index (ProdSI) methodology and the metrics continue to be validated in a case study of two generations of a consumer electronics product. In addition, LCA (Life Cycle Analysis) modeling is performed for a jet engine component comparing the use of two materials: Titanium and composites. Module 2: The product information model is extended to the pre-manufacturing stage of the products’ life-cycles for the case study at General Electric Aviation. Information about the carbon fiber, epoxy, plastic film and paint are integrated, based on information from suppliers and public literatures. Work on information modeling by the Syracuse team continues with expansion of their initial model to integrated product information models for ProdSI assessment. Module 3: A comprehensive modeling and evaluation effort has been underway towards achieving improved product and process performance in cryogenic machining process, with focus on the appropriate application of cryogenic coolant. During the preliminary work, it has been shown that the amount of cryogenic coolant applied has a critical impact on the ProcSI evaluation results. Module 4: The expanded integrated product information model including the four life-cycle stages and 6Rs, along with the ProdSI methodology, was adapted with advanced and relevant modeling techniques. Validation of this new integrated product information model has just been completed by our participating research group at Syracuse University. Module 5: ProdSI evaluation for two generations of printer cartridges has been extended to include a customer-focused model for our partnering company. For the aerospace product case study, LCA work has begun and this will be completed together with the participating GE team. The evaluation of composite blade for its pre-manufacturing stage has been carried out, and the evaluation of the manufacturing, use and post-use stages is in progress.
|
| Jobs Created |
0.53 |
| Description of Jobs Created |
This project retains one Regular Faculty at 0.03 FTE. Subrecipient Syracuse University retains a Graduate Research Assistant (0.50 FTE). |
Purchaser Information
(Grants)
| Purchaser Information |
| Contracting Office ID |
Not Reported |
| Contracting Office Name |
Not Available |
| Contracting Office Region |
Not Available |
| TAS Major Program |
13-0549 |
| Award Information |
| Award Date |
01/08/2010 |
| Award Number |
60NANB10D009 |
| Order Number |
|
| Award Type |
Grants |
| Funding Agency ID |
13 |
| Funding Agency Name |
Department of Commerce |
| Funding Office Name |
Not Available |
| Awarding Agency ID |
13 |
| Awarding Agency Name |
Department of Commerce |
| Amount of Award |
$1,499,934 |
| Funds Invoiced/Received |
$1,427,849 |
| Expenditure Amount |
$1,428,100 |
| Infrastructure Expenditure Amount |
$0 |
| Infrastructure Purpose and Rationale |
Not Reported |
| Infrastructure Point of Contact Name |
Not Reported |
| Infrastructure Point of Contact Email |
Not Reported |
| Infrastructure Point of Contact Phone |
Not Reported |
| Infrastructure Point of Contact Address |
Not Reported |
| Infrastructure Point of Contact City |
Not Reported |
| Infrastructure Point of Contact State |
Not Reported |
| Infrastructure Point of Contact Zip |
Not Reported |
Product or Service Information
(Grants)
| Product or Service Information |
| Primary Activity Code |
U20 - NTEE |
| Activity Description |
General Science |
| Sub-Awards Information |
| Sub-awards to Organizations |
1 |
| Sub-award Amounts to Organizations |
$180,000 |
| Sub-Awards to Individuals |
0 |
| Sub-Award Amounts to Individuals |
$0 |
| Number of Sub-awards less than $25,000/award |
0 |
| Amount of Sub-awards less than $25,000/award |
$0 |
| Number of payments to vendors greater than $25,000 |
3 |
| Total Amount of payments to vendors greater than $25,000/award |
$190,608 |
| Number of payments to vendors less than $25,000/award |
236 |
| Total Amount of payments to vendors less than $25,000/award |
$108,561 |
Sub-award 3048106936-10-358 - SYRACUSE UNIVERSITY
| Sub-Award Amount |
$180,000 |
| Sub-Award Date |
05/17/2010 |
| Sub-Awards Disbursed |
$112,325.04 |
| Project Location - City |
Syracuse |
| Project Location - State |
NY |
| Project Location - Zip Code |
13244-1200 |
| Project Location - Congressional District |
24 |
| Sub-Recipient DUNS Number |
002257350
|
| Sub-Recipient Address |
CONTROLLERS OFFICE SKYTOP OFFICE BLDG |
| Sub-Recipient City |
SYRACUSE |
| Sub-Recipient State |
New York |
| Sub-Recipient Zip Code |
13244-0001 |
| Sub-Recipient Congressional District |
24 |
Required To Report Top 5
Highly Compensated Officials |
No |
Flir Systems, Inc - Award Number 60NANB10D009 - Flir Systems, Inc
| Award Number |
60NANB10D009 |
| Sub-Award Number |
N/A |
| Vendor DUNS Number |
146488635 |
| Vendor HQ Zip Code + 4 |
01862-2501 |
| Vendor Name |
Flir Systems, Inc |
| Product and Service Description |
Laboratory and Scientific Equipment |
| Payment Amount |
$66,837 |
Lavision Inc. - Award Number 60NANB10D009 - Lavision Inc.
| Award Number |
60NANB10D009 |
| Sub-Award Number |
N/A |
| Vendor DUNS Number |
107586633 |
| Vendor HQ Zip Code + 4 |
48197-5440 |
| Vendor Name |
Lavision Inc. |
| Product and Service Description |
Laboratory and Scientific Equipment |
| Payment Amount |
$93,776 |
Midwest Manufacturing Resources, Inc. - Award Number 60NANB10D009 - Midwest Manufacturing Resources, Inc.
| Award Number |
60NANB10D009 |
| Sub-Award Number |
N/A |
| Vendor DUNS Number |
028368822 |
| Vendor HQ Zip Code + 4 |
44087-4328 |
| Vendor Name |
Midwest Manufacturing Resources, Inc. |
| Product and Service Description |
Laboratory and Scientific Equipment |
| Payment Amount |
$29,995 |
| Location Information |
| Latitude, Longitude |
38º 2' 12",
-84º 29' 57" |
| Congressional District |
06 |
| Address 1 |
109 Kinkead Hall |
| Address 2 |
|
| City |
Lexington |
| County |
Fayette |
| State |
KY |
| Zip |
40508-0000 |
|
 |